Browsing from:

Kennedy Engine Co

Marine Engines

Detroit Diesel Marine Engines

Remanufactured Detroit Diesel Marine Engines series 71, 92 & 149 in 8, 12 & 16 cylinders. Exchange engines in stock and available for immediate delivery will save you time on the most popular models. All engines are remanufactured with genuine factory Detroit Diesel parts and components. Engines are Dynometered tested to insure quality and performance.

Volvo Penta Marine Engines

New Volvo Penta diesel engines inboard and inboard/outboard with duoprop outdrives for both commercial and pleasure vessels.

Fire Pump Package

Kennedy Engine specializes in fabrication of high volume water pumps powered by diesel engines set up to deliver water at high pressure up to 400 feet. Used mainly in the marine environment such as tug boats, fire boats, super tankers, oil drilling platforms and offshore supply vessels. Various engines and pump combinations are available to optimize each pump unit to meet your specifications. All engines are remanufactured with genuine factory Detroit Diesel parts.

Generators

Industrial

Kennedy Engine has available industrial generators ranging from 10KW to 2000 KW. 10KW to 1250KW units are available in either diesel, propane or natural gas. Units over 1250KW are available in diesel.

Commerical

Kennedy Engine has available commercial generators ranging from 1 OKW to 2000 KW. 10KW to 1250KW units are available in either diesel, propane or natural gas. Units over 1250KW are available in diesel.

Residential

Kennedy Engine is a factory representative for Generac residential generators. Models availablerange from 6KW to 40KW in propane or natural gas. Diesel powered units are available from 8KW to 50KW.

Truck Service

Full service truck shop specializing in trucks with Detroit Diesel series 60. Kennedy Engine has trained and experienced craftsmen to service your electronic DDEC series 60 engines. Whether it is just a tune-up, million mile overhaul or reprogram your computer, Kennedy Engine can get it done quickly and efficiently to get your truck back on the road. DOT inspections done while you wait.

Bus & Motorcoach

Bus & motorcoach engines are available for exchange engines series 60, 71 & 92. Kennedy Engine's Bus & Motocoach Shop specializes in engine, transmission & chassis service & repairs. A quick pit oil change & service for your engine, transmission and generator is available at our Biloxi, MS shop. Within an hour, your bus or motorcoach can usually get your oil & filters changed including chassis greased.

Recreation Vehicles

Recreation vehicle engines are available for exchange engines series 60, 71 & 92. Kennedy Engine's bus & motorcoach shop specializes in engine, transmission & chassis service & repairs. A quick pit oil change & service for your engine, transmission and generator is available at our Biloxi, MS shop. Within an hour, your bus or motorcoach can usually get your oil & filters changed including chassis greased.

Preventive Maintenance

Our program is based on our proven abilities to properly maintain your equipment and diagnose potential problems before they occur. Our program assures that your emergency stand-by equipment will be available when you need it the most.

With Kennedy Engine Company’s preventive maintenance program, a checklist is used to verify each item inspected or serviced, so no systems or components are overlooked or forgotten. After each service call, a copy of the Maintenance Service Report is given to the customer, listing all parts used and repairs made along with any suggested or necessary repairs that need to be made. All service work will be scheduled in advance and you will be billed only after the work has been completed.

In the event you have an emergency situation and need a technician immediately, one can be sent to your facility. A technician is available 24 hours a day, 365 days a year to bring your emergency equipment back to an operational condition. As an added service to you, a component list of your equipment will be retained in our electronic data base, so that in the event of an emergency service call, the proper replacement parts can be brought to your facility, expediting repairs and reducing costly return trips.

The following are some of the services provided in our annual preventive maintenance program. Service/maintenance trips will be performed as scheduled and will include, at a minimum, one complete annual service and inspection.

Services Included:

Engine Air Cleaners Visually inspect air intake system; service or replace filter as needed.
Ignition System Inspect, clean or replace spark plugs as needed; check magneto/distributor; replace distributor cap and rotor cap as needed; adjust timing as needed.
Governor Visually inspect components; lubricate linkage as needed; verify speed and sensitivity; adjust as needed.
Engine Cooling System Visually inspect radiator/heat exchanger condition; visually inspect for leaks; check antifreeze level and freeze protection; adjust as needed; check belts and hoses; check coolant additives; adjust as needed.
Engine Lubrication System Visually check for leaks; change lube oil and filters once every 12 months or 150 operating hours.
Engine Electric System Hydrometer test battery; clean and lubricate battery posts and cables; load test batteries; inspect alternator belts and adjust as needed; inspect battery charger for proper operation and adjust as needed.
Engine Fuel System  Visually inspect for leaks; inspect all visible connections and flexible hoses; adjust carburetor as needed; change fuel filters once a year with oil change or as needed; replace flexible fuel hoses as needed (excluding woven metal hoses); inspect for water in fuel day tank and main fuel tank.
Engine Exhaust System Visually inspect for leaks or corrosion; visually inspect muffler condition; drain condensation as needed.
AC Generator Visually inspect generator condition; visually inspect generator windings; inspect generator wiring and connections; visually inspect rear generator bearing.
Generator Controls  Inspect all instruments for proper operation; inspect timers and relays for proper operation; inspect all connections for tightness; verify proper operation of safety circuits, shutdowns and alarm systems.
Operation  Run engine unloaded and record operating data; at Customer’s request and in his presence, transfer load to generator set and make adjustments as needed.
Clean-up  Wipe down unit; remove used fluids and materials from Customer’s location and dispose of them in accordance with EPA regulations at our facility.

Your emergency stand-by equipment represents a sizable investment - PROTECT IT ACCORDINGLY. Kennedy Engine Company can protect your investment and assure that your equipment performs as it was designed to, when it is needed the most, in an emergency.

(If this profile looks odd, please let us know.)

Platinum
Login to send Inquiry
A user with the specified email address already exists. Please login with your password to proceed.
Email (Username)  
 
Password  
 
Remember me
 
  Forgot your password?



More options & more space...